Canon Super G3 FAX Board-AS Service Manual page 64

11. Install the Controller Box Cover.
• 5 Screws
4x
1x
12. Install the Rear Cover.
• 3 Protrusions
• 1 Claw
• 4 Screws
• 1 Rubber Cap
4x
13. Install the Left Rear Cover.
• - 3 Protrusions
• 2 Screws
2x
14. Open the Right Lower Cover (the Right Upper Cover
will open at the same time).
15. Install the Right Rear Cover 1, and close the Right
Upper Cover and the Right Lower Cover.
16. Close the Right Rear Cover 1.
• 3 Screws
59
6. Installation
3x