Canon Super G3 FAX Board-AS Service Manual page 60

5. Remove the tape and, install the Fax Unit.
• 2 Protrusions
• 1 Screw (TP; M3x4: Black)
CAUTION:
• Be careful not to damage the [A] part of the
speaker as the wiring may be broken.
• Be sure to tighten the screw while holding the FAX
Unit.
• After tightening the screw of the FAX Unit, check
for any backlash. If there is backlash, tighten the
screw again with the protrusion precisely fitted.
[A]
TP; M3x4 (Black)
Protrusion
1x
6. Connect the 2 cables of the FAX Unit.
• 2 Connectors
2x
7. Affix the following FAX Approval Label.
• [A] For USA
• [B] For Taiwan
[A]
[B]
Protrusion
8. Affix the appropriate Modular Label over the existing
label.
55
6. Installation