Honeywell NOTIFIER INSPIRE E10 Operating Instructions Manual page 29

Once an adjustment is made to the time and date at one panel in a network of panels, the other panels
time and date settings get adjusted automatically to show same time and date at panels throughout a
network.
How to set time and date?
01
Select the Menu icon
02
Select the 'Setting'
03
You can adjust the time and date to be updated from the internet by slider switch to On position
future option.
04
You can select a 12 hour time format display by sliding the switch
option. The factory default setting is 24 hour time format display.
05
You can select a country time zone from a list
06
You can manually set the time by selecting 'Set Time'
Minutes, Seconds and then select 'Done' button to apply the changes.
07
You can manually set the date by selecting 'Set Date'
Month and Year and then select 'Done' button to apply the changes.

and then select the 'Menu tab'

and then select the 'Time and Date Settings'
INSPIRE E10/E15 Control Panels - Operating instructions

.


to the 'On' position,

, this is a future option.

. and scroll the touch-screen to the required Hour,

and scroll the touch-screen to the required Day,
option.
this is a future

, this is a
29