Table of Contents
Advertisement
M@ NOTES ON CASSETTE TAPE
* Before loading a cassette tape, take up the slack in
the tape to prevent if from becoming entangled
around the capstan.
ENGL
After the recording has been finished, remove the
tab to prevent the recorded contents from being
erased or recorded on accidently.
For side B
For side A
To rerecorded after tabs have been removed,
cover with adhesive tape.
Do not store the tapes in direct sunlight or near
equipment that generates heat. Keep the tapes
away from any magnetic fields.
Do not touch the tape surface and store the tapes in
their cases after use. Dust can cause contamination
of the heads resulting in noise.
M@ CLEANING THE HEAD SECTION
Clean the head section about every 10 hours of use
using the commercially available head cleaning tape.
¢ For better recordings, you should clean the head
section before every recording.
* After cleaning the head section, do not load a tape
until the cleared section is completely dry.
M DEMAGNETIZING THE HEAD
Demagnetize the recording/playback head about
every 10 hours of use using a commercially avaiable
demagnetizer so that the magnetized head may not
cause the sound to be deteriorated.
13
Advertisement
Table of Contents
