Introduction READ THIS BEFORE OPERATING YOUR UNIT : TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, WARNING DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
CONTENTS Introduction READ THIS BEFORE OPERATING YOUR UNIT SAFETY INSTRUCTIONS Rear Panel Connections Front Panel Controls Before Operation Operations PLAYING BACK TAPES AMS(Automatic Music Search) PLAY RELAY PLAY RECORDING CD SYNCHRO RECORDING DUBBING FROM DECK B TO DECK A COUNTER DISPLAY MEMORIZING THE SPECIFIC POINT Troubleshooting Guide Specifications...
Connect the cords between the PLAY OUTPUT jacks of this unit and the PLAY INPUT jacks of your amplifier. DIGI LINK JACKS Connect this jack to the DIGI LINK jack of Sherwood amplifier/receiver bearing the DIGI LINK III or II logo to control this unit remotely by DIGI LINK system.
Front Panel Controls DOUBLE CASSETTE DECK DD-6200 PLAY POWER SWITCH Press this switch to turn the power on and press again to turn the power off. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier or receiver.
Page 7
PAUSE BUTTON( Press this button to temporarily stop playing back or recording. To restart, press the PLAY button. REVERSE PLAY BUTTON( Press this button to play back the back side of the tape. FAST FORWARD and REWIND BUTTONS( STOP BUTTON( FORWARD PLAY BUTTON( EJECT BUTTON( CASSETTE DOOR...
Page 8
This unit can be remotely controlled with Sherwood DIGI LINK III amplifier or receiver. For available functions, refer to the compatible unit’s operating instructions. To listen to tapes by DIGI LINK system, first make DIGI LINK connection between this unit and Sherwood compatible amplifier or receiver.
Before Operation NOTES ON CASSETTE TAPE Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recorded on accidently.
Operations PLAYING BACK TAPES Note : Do not use the metal tapes because these are not played back and recorded correctly. Press the POWER swith to turn the power on. Do not turn the power off while operating the unit. In this case, the tape door may not be opened. Load the tape with the bottom side up and to close the cassette door, push the door gently until it clicks.
To temporarily stop playback.(Deck A only) “ ” indicator lights up. To restart playback, press the corresponding PLAY button. To rapidly advance or rewind the tape, press the corresponding button in the stop mode. At the desired point, press the STOP or corresponding PLAY button.
RECORDING Load a tape to be recorded into deck A. Be sure the erase-protection taps on the tape are in place. The type of tape(normal or chrome) is automatically detected. The metal tapes are not recorded correctely. When recording with Dolby B NR, select the Dolby B NR mode.
To stop recording. CD SYNCHRO RECORDING When this unit is connected to a Sherwood compatible CD player controlled remotely by the DIGI LINK III system, the CD synchro recording can be performed. Do the steps 1, 2 and 3 in “RECORDING”...
DUBBING FROM DECK B TO DECK A Open the cassette door by pressing the EJECT button and load a blank tape into Deck A and prerecorded tape into Deck B respectively. Because dubbing starts from the front side, if there is not the erase - protection tap on that side, dubbing can not be performed.
Resetting the counter n each counter mode, you can reset the counter to “0000” or “00 min. 00 sec.”. Example) In the tape counter mode. RESET MEMORIZING THE SPECIFIC POINT This function is helpful to listen to the specific passage. At the desired point, press the MEMORY button to memorize.
Troubleshooting Guide If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. PROBLEM No power The AC input cord is disconnected. The POWER switch is not pressed completely.
Specifications TYPE Track system Recording system Erasing system Tape speed Heads Deck A Deck B Wow and flutter, unweighted CCIR/ARM Frequency response, - 20 dB recording / playback, Dolby NR OFF Normal Chrome Signal to noise ratio, weighted CCIR/ARM Dolby NR OFF, normal/chrome Dolby B NR, normal/chrome Line input sensitivity/impedance Line output level/impedance...