Table of Contents
Advertisement
Turn shut-off valve on and check for leaks. If connections
are squarely assembled, a slight retightening of the nuts
will stop any leaks.
If toilet is leaking in between the tank and bowl, carefully
retighten the three tank bolts evenly. Check all bowl and
tank connections for leaks for several days.
Fig. #9
Hold float under water for a few seconds to fill ballast.
Adjust float by sliding it up or down on float rod until water
level is at the marked water line on the flush valve over-
flow.
Float
Check all connections for leaks for several days.
Float Rod
Fig. #10
BA
Kohler Co., Kohler, WI
5
111469-2-
(-)
Advertisement
Table of Contents
