Pioneer PD-T507 Service Manual page 10

e How to install the disc table
[1] Use nippers or other tool to cut the two sections
marked ® in figure [1]. Then remove the spacer.
[2] While supporting the spindle motor shaft with
the stopper, put spacer on top of the motor base
(angled so it doesn't touch section ®), and stick
the disc table on top (takes about 9kg pressure).
Take off the spacer.
i Spacer
Chassis S
(pressure of
about 9kg)
(Q + Disc table
3, 5mm
position
Par
Mar