Restore The Earbuds To Factory Settings - Bose ULTRA OPEN EARBUDS Manual

RESTORE THE EARBUDS TO FACTORY SETTINGS

A restore to factory settings clears all settings and return the earbuds to their original
out-of-box state. After, the earbuds can be configured as if they were being set up for
the first time.
Restoring to factory settings is only recommended if you are having issues with the
earbuds or you have been instructed to do so by Bose customer service.
1. Remove the earbuds from the Bluetooth list on your device.
2. Remove the earbuds from your Bose account using the Bose Music app.
NOTE: For more information about how to remove the earbuds from your Bose
account using the Bose Music app, visit: support.Bose.com/UOE
3. With the earbuds in the charging case and the case open, press and hold the
button on the back of the case for 20 seconds until the earbuds status lights blink
white 2 times, slowly blink blue, and then turn off.
NOTE: Make sure both earbuds are in the case and the case is open.
4. Repeat the previous step 2 more times.
After the third time, the status lights blink amber for 3 seconds to indicate factory
settings are being restored.
When the restore is complete, the status lights slowly blink blue. The earbuds are
now in their original out-of-box state.
NOTE: If you're unable to resolve your issue, additional troubleshooting and
support is available at: support.Bose.com/UOE
TRO UBL E SH O OTI NG
support.Bose.com/UOE
|
5 4 E N G
support.Bose.com/UOE