Table of Contents
Advertisement
58
PROGRAMMING MODE - SETUP MODE
27. how to set custom program
Entering set up
mode.
You will see LqC1
Structure of
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display. Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button to
select Number of Course (1~20). Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display. Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button to
select Number of Course (NO 1~20).
Press the Start button.
Setup course you want, refer to below.
Button
• Select course
• Wash time
• Rinsing times per cycle
• Rinse cycle
• Top spin speed
• Pre-wash
• Water level
• Rinse spin, spin only
• Non-stop wash
• Rinse spin enable
Display
Cos1 : 90°C (194°F) course
Cos2 : 75°C (167°F) course
Cos3 : 60°C (140°F) course
Cos4 : 40°C (104°F) course
Cos5 : Cold course
Advertisement
Table of Contents
