Table of Contents
Advertisement
40
PROGRAMMING MODE - SETUP MODE
10-1. Pause function set up
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display
.
Press the Start button.
Press 75°C (167°F) or 60°C (140°F) button and then
select
or
Disable
Enable
Press the Start button.
The machine sets up the pause function, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button three
times.
Button
.
Display
One or the other will
display.
Advertisement
Table of Contents
