Table of Contents
Advertisement
48
PROGRAMMING MODE - SETUP MODE
17. Top spin speed – final spin time depends on RPM
Entering set up
mode.
You will see LqC1
NOTE
• Top spin speed
0 : 1150 rpm
1 : 1000 rpm
2 : 900 rpm
3 : 800 rpm
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button. Display
(167°F) or 60°C (140°F) button to select course.
: 90°C (194°F) course
: 75°C (167°F) course
: 60°C (140°F) course
: 40°C (104°F) course
: Cold course
Press the Start button.
Display previous top spin speed.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
top spin speed. (0~3)
Press the Start button.
The machine sets up the top spin speed, then advances
to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
4 : 700 rpm
5 : 600 rpm
6 : 500 rpm
Button
. Press 75°C
Display
Advertisement
Table of Contents
