Advertisement
Available languages
Available languages
Maintenance and Service
Maintenance and Cleaning
Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Clean the tool holder (1) and locking sleeve (2) from
u
time to time.
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Bosch Power Tools
Disposal
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 11).
中文
安全规章
电动工具通用安全警告
阅读随电动工具提供的所有安
警告！
全警告、说明、图示和规定。
不遵照以下所列说明会导致电击、着火和/或严重伤
害。
保存所有警告和说明书以备查阅。
警告中的术语"电动工具"是指市电驱动（有线）
电动工具或电池驱动（无线）电动工具。
工作场地的安全
保持工作场地清洁和明亮。杂乱和黑暗的场地会
u
引发事故。
不要在易爆环境，如有易燃液体、气体或粉尘的
u
环境下操作电动工具。 电动工具产生的火花会点
燃粉尘或气体。
操作电动工具时，远离儿童和旁观者。注意力不
u
集中会使你失去对工具的控制。
电气安全
电动工具插头必须与插座相配。绝不能以任何方
u
式改装插头。需接地的电动工具不能使用任何转
换插头。未经改装的插头和相配的插座将降低电
击风险。
避免人体接触接地表面，如管道、散热片和冰
u
箱。如果你身体接触接地表面会增加电击风险。
不得将电动工具暴露在雨中或潮湿环境中。水进
u
入电动工具将增加电击风险。
不得滥用软线。绝不能用软线搬运、拉动电动工
u
具或拔出其插头。使软线远离热源、油、锐边或
运动部件。受损或缠绕的软线会增加电击风险。
当在户外使用电动工具时，使用适合户外使用的
u
延长线。适合户外使用的电线将降低电击风险。
如果无法避免在潮湿的环境中操作电动工具，应
u
使用带有剩余电流装置（RCD）保护的电源。
RCD的使用可降低电击风险。
中文 | 11
1 609 92A 8N0 | (10.01.2024)
Advertisement
