Jabra GN9120 Manual page 2

EHS setup:
The Jabra GN12x must support and be set up on DHSG EHS.
You can check or set it as follows.
1. Place the headset in the base.
2. Then press the PLUS and MINUS buttons simultaneously for 6
seconds until the online display on the headset starts to flash.
3. The base will now display to you the EHS currently installed. The
online light indicates "MSH", the pulsating light indicates "RHL", the
MUTE light "DHSG" and the battery display "AEI".
4. With the PLUS and MINUS buttons, you can now switch into the
different EHS types.
5. To confirm the EHS has successfully installed, the headset
automatically switches back to charge mode after approx. 10
seconds
Base setup:
https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/b85ae8b4-acbe-
4500-bda6-4c24b352c17d
23/01/2024 09:38
Page 2 of 3