Jabra GN9120 Manual

Jabra GN9120 Flex NC Microphone With EHS
How to connect my Jabra GN9120 EHS / GN9125 EHS with
Alcatel IP Touch 4028 EE, 4038 EE, 4068 EE
Prerequisite:
Jabra GN9120 EHS + Jabra Link 14201-20
Jabra GN9125 EHS + Jabra Link 14201-20
In combination with one of the following Avaya phones:
IP 2410
IP 5410
IP 6416D+M/ 6424D+M
Connection:
1. Insert the RJ10 to RJ10 connection cable supplied of the GN912x
into the socket marked with the "phone" on your GN912x base and
the other end into the socket marked with the "phone" symbol on
the EHS adapter.
2. Now connect the end of the RJ45 to RJ45 connection cable (EHS
adapter) marked in "red" to the socket marked with "AUX" on the
EHS adapter as well as with the "AUX" socket on your GN912x base.
3. Now connect the white RJ10 to RJ10 connection cable marked "D" to
the socket marked with "headset/handset" on the EHS adapter as
well as with the "headset" socket on your phone.
4. Connect the dial tone sensor with the EHS adapter and attach this in
the middle on the phone speaker.
https://www.jabra.in/supportpages/jabra-gn9120/9120-28-11/faq/b85ae8b4-acbe-
4500-bda6-4c24b352c17d
23/01/2024 09:38
Page 1 of 3