Assemble Drive Control Lever - Murray MYZ4219000 Operator's Manual

Fig. 2C
12
Assemble Drive Control
Lever
1. Keep the larger tip of the upper handle adjuster in line
with the adapter that secures the lever to the mower.
2. Connect them tightly by screwing the knob clockwise.
3. Repeat this process on the remaining side.
Fig. 3
ZERO TURN MOWER
To adjust the height of the lever：
1. Remove the two bolts and two lock nuts that secure the
drive control lever to the upper handle adjuster.
2. There are two selectable positions, with the ability to
move up or down for adjustment. Secure the two bolts
either in the upper or lower position. (Fig.4)
Fig. 4
ZERO TURN MOWER
To adjust levers forward/rearward：
The drive control levers are designed to be adjustable.
Adjust them to a comfortable position for you before
operation.
1. Rotate the knob counter-clockwise to loosen it.
2. Lift and rotate the drive control lever into the desired
position.
3. Rotate the knob clockwise to secure the drive control
lever into position.
4. If the levers do not line up after making the knob
adjustment, loosen nuts, align levers, and re-tighten nuts.
Fig. 5
13