Table of Contents
Advertisement
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button
Function
On/Off
Start/Stop
4.3 Touch fields
Use the touch fields to select different functions dir-
ectly.
The touch fields on the outside of the control panel are
designed for general functions; the touch fields on the
inside of the control panel are for the cooking mode.
Touch field
Function
on the out-
side
Timer
Childproof lock
Information
Pyrolytic self-cleaning
Touch field
Function
on the in-
side
4D hot air
Top/bottom heating
Types of heating
Temperature
AutoPilot
Weight
Time-setting options
Rapid heating
4.4 Control ring
You can use the control ring to change the setting val-
ues that are shown in the display.
If you have reached the maximum value for setting val-
ues, such as the temperature, minimum or maximum
value, this value remains in the display. If required, use
the control ring to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
Use
Switch the appliance on or off.
Short press: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
The touch field for the function that is currently selected
lights up red.
Use
Select the timer.
Press and hold for approx. four seconds: Activate or deactivate the child-
proof lock.
Display additional information about a function or setting.
To call up the basic settings, press and hold this for ap-
prox. three seconds when the appliance is switched off.
Select the cleaning function operating mode.
Use
Directly select the "4D hot air" type of heating.
Select the "Top/bottom heating" type of heating directly.
Select the operating mode types of heating.
Select the temperature in the cooking compartment.
Select the AutoPilot operating mode with cooking programmes.
Select the weight for the operating mode.
Select the time-setting options.
Starts or cancels rapid heating for the cooking compartment.
4.5 Display
The display shows the current setting values on differ-
ent levels.
Value in the
foreground
Value in the
background
Enlarge-
ment
Familiarising yourself with your appliance en
The value in the foreground is high-
lighted in white. You can use the control
ring to change the value directly.
Once operation has started, the temper-
ature or level is displayed in the fore-
ground.
Values in the background are displayed
in grey. To change the value using the
control ring, select the required function
in advance.
As long as you use the control ring to
change a value, only this value will be
displayed as enlarged.
7
Advertisement
Table of Contents
