Table of Contents
Advertisement
en Basic settings
14 Basic settings
You can configure the appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Language
Clock
Audible signal
Button tone
Display brightness
Clock display
Lighting
Childproof lock
Operation after switch-
on
Night-time dimming
Brand logo
Fan run-on time
Pull-out system
1
Factory setting (may vary according to model)
15 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
15.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
16
Selection
See selection on the appli-
ance.
Clock in 24-hour format.
Short duration (30 seconds)
Medium duration (1 minute)
Long duration (5 minutes)
Switched on
Switched off (tone remains
1
for
)
5 settings
Off
1
Digital
Off during operation
1
On during operation
1
Button lock only
Door lock and button lock
Main menu
1
Types of heating
AutoPilot
1
Switched off
Switched on
1
Display
Do not display
1
Recommended
Minimum
Not retrofitted (if shelf sup-
ports and a single set of
1
pull-out rails are fitted)
Retrofitted (if two or three
sets of pull-out rails are fit-
ted)
Basic setting
Sabbath mode
Factory setting
Factory setting (may vary according to model)
1
14.2 Changing the basic settings
Requirement: The appliance is switched off.
Press and hold for approx. three seconds.
1.
2.
Press
to confirm the messages in the display.
a The first basic setting is shown in the display.
1
Use the control ring to change the basic setting.
3.
Press
.
4.
a The next basic setting appears in the display.
Use to scroll through the basic settings and, if re-
5.
quired, use the control ring to change any of these
settings.
To save the changes, press and hold for approx.
6.
three seconds.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
Press
.
▶
a All changes will be discarded and not saved.
14.3 Setting the time
Requirement: The appliance is switched off.
Press and hold for approx. three seconds.
1.
Press
to confirm the messages in the display.
2.
a The first basic setting is shown in the display.
Press
.
3.
a The "Time" basic setting is shown in the display.
Use the control ring to change the time.
4.
To save the change, press and hold for approx.
5.
three seconds.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
Selection
Switched on
1
Switched off
Reset
1
Do not reset
Advertisement
Table of Contents
