Table of Contents
Advertisement
BASIC OPERATION
Channel Selection
There are two ways to select a channel:
1. Using number buttons followed by OK button on the remote control to
select channel directly.
When using the number buttons, you can directly select channels that
were either not saved during the auto tuning, or manually erased.
2. Using
button on the remote control, or press forward / backward
of TV control button to switch channels in sequence. You will see all
the channels that the TV has saved, but will not see channels that
were either not saved, or manually erased.
Channel Edit
While watching programs in TV mode, press OK button to show the list of
"Quick Button", in which you can select and enter "CH LIST"(channel list).
• In channel list, press / / / button to select the desired channel in the
category "All". Then press and hold OK button to open the menu of
channel edit which includes "Rename(only for DTV mode)", "Delete", "Skip"
and "Favorite". You can rename, delete, skip the selected channel, or add
it into the favorite list.
• In channel list, you can check the list of all favorite channels in the category
"FavList"(favorite list) on the top line. In the favorite list, press / / / button
to select the desired favorite channel , then press and hold OK button to decide
if you will remove it from the favorite list.
• While playing favorite channels in the favorite list, you can only switch to play
another favorite channel while pressing
saved channels, please return to the category "All" in the channel list.
Volume Adjustment
Press VOL buttons on the remote control, or press le / right of the TV
+
-
control button to adjust the sound volume of the TV.
Press the MUTE (
) button to turn on or turn o the TV sound. The mute
icon will appear in the lower-right corner of the screen. To resume sound
when TV is muted, press the MUTE (
VOL button.
+
Input Source
Input options are accessible directly from the home screen by selecting the
Source icon. Press OK button to confirm your selection.
button. If you want to watch all
) button again, or simply press
Alternatively, you can use the SOURCE button on your remote control to
access the list of input sources from any channel or screen.
Electronic Program Guide
Electronic Program Guide
is supplied by the program
providers and o ers information
about the programs to be
broadcast. You can access it
in DTV mode by pressing the
GUIDE button on the remote
control.
• Press the RED button to edit the selected program.
Remind: Setup a watching appointment to remind you of viewing the
selected program.
Schedule: Show the list of watching appointments.
• Press GREEN button to skip to the position where you can
change the date by pressing ◄/► navigation button.
Time-shi Function
Time-shi is used to record a DTV program when your viewing is interrupted
or delayed. Press the PAUSE ( ) װbutton to pause playing the DTV program
and start to record the program. Press the PLAY ( ►) button to continue
playing the program from when you paused. Press the EXIT button to call out
a prompt reminder, asking you whether or not to stop the time-shi function.
NOTE
• While in time-shi mode, please do not turn o the TV.
• Before time-shi , you'd better format your USB device to ensure there is enough
space for time-shi recording.
• The recorded program of time-shi will be cleared automatically a er playing
the program or stopping time-shi function.
• If time-shi recording lasts too long, and there is no more space for recording
new program, the TV will start to play the program automatically from the
recording beginning to release the space of program which has been played
for new program recording.
• If you want to change the settings for Time-shi function, please select
<MENU → More → TV Setting → Setup → TimeShi Setting>.
11
Advertisement
Table of Contents
