Basic Operation - Kogan KALED50XXXTA User Manual

Basic Operation

QUICK START GUIDE
• Connection
1. Connect the mains and antenna.
2. Press Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the◄/►button to select the desired OSD (On Screen Display) language.
Country
Press the◄/►button to select the country.
Channel Tuning
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
Turning on and off the TV
• Turn on the TV
Connect the AC input cable.
button on remote control can turn on TV from standby mode.
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the
set will automatically turn off in 5 minutes if no input signal. When VGA cable is
TV
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 23): Press 2 and 3 in a short time.
If TV has a power switch, turn it on first .
_________
8
Press the