Table of Contents
Advertisement
Web screen configurations
Image capture size
Select the resolution for H.264 images.
Selectable options will vary depending on the selected
resolution setting.
Setting value:
H.264(1)
1920×1080
1280×720
640×360 (when HDR is "Low" or "High")
H.264(2)
1280×720
640×360
320×180
H.264(3)
1280×720
640×360
320×180
H.264(4)
1280×720
640×360
320×180
Factory settings:
H.264(1): 1920×1080
H.264(2): 1280×720
H.264(3): 640×360
H.264(4): 640×360
Note
● When the Priority Mode (page 44, page 65)
selection is "NDI|HX", the following settings will be
available.
H.264(1): 1920×1080, 1280×720
H.264(2): 640×360
Transmission priority
Set the transmission mode for H.264 images.
Setting value:
Constant bit rate
Transmits H.264 images at the bit rate
specified in [Max bit rate (per client)].
Frame rate
Transmit H.264 images at the frame rate
specified in [Frame rate].
Best effort
Transmit H.264 images at a variable bit
rate between the maximum and minimum
specified in [Max bit rate (per client)],
according to the network bandwidth.
Factory settings: Frame rate
Note
● When the Priority Mode (page 44, page 65)
selection is "NDI|HX", this item is fixed to "Frame
rate".
70
(continued)
Frame rate
Set the frame rate for H.264 images.
Setting value:
For 59.94Hz:
5fps, 15fps, 30fps, 60fps
For 50Hz:
5fps, 12.5fps, 25fps, 50fps
Factory settings:
For 59.94Hz: 30fps
For 50Hz: 25fps
Notes
● When 1920×1080/60fps or 1920×1080/50fps is
used, the setting becomes only H.264(1).
● When setting 1920×1080/60fps or
1920×1080/50fps, set H.264(4) to "Off" and then set
the frame rate and bit rate.
Max bit rate (per client)*
Specify the H.264 bit rate per client.
When [Transmission priority] is set to [Best effort], specify
the maximum and minimum bit rate.
Setting value:
512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps,
3072kbps, 4096kbps, 6144kbps, 8192kbps,
10240kbps, 12288kbps, 14336kbps, 16384kbps,
20480kbps, 24576kbps
Factory settings:
H.264(1): 14336kbps
H.264(2): 8192kbps
H.264(3): 4096kbps
H.264(4): 4096kbps
*
The H.264 bit rate is limited by the [Bandwidth control (bitrate)]
(page 92) setting under the [Network] tab of the network
setup screen [Network]. The actual bit rate may be lower than
the specified value.
Advertisement
Table of Contents
