Table of Contents
Advertisement
Continued from Figure 8-6:
Note: Be sure to save your settings before exiting the configuration mode. The controller reverts to
the last saved settings when the master switch is moved to the OFF/RESET position.
There are 3 options when the display says SAVE:
Press:
To return to the first parameter, coarse voltage adjustment, to check
or change settings before saving. See Figure 8-6.
or
To save changes.
or
To discard changes without saving.
"Yes"or "no" flashes when the up or down arrow is pressed and then the
controller exits the configuration mode. The display returns to the
runtime hours.
Now move the master switch to OFF/RESET.
* x in the examples above denotes any number from 0 to 9.
model-to-model.
Figure 8-7 Output Voltage Adjustments, Continued
TP-6335
9/04
To enter SAVE mode.
The actual values may vary from
Reconnection/Adjustments 31
Display : *
S A V E
S A V E
x x
1 P
Y E S
n o
x x x x
Advertisement
Table of Contents
