Kitchen Timer; Time Cooking - Kenmore 565.60382 Use & Care Manual

Table of Contents

Advertisement

KITCHEN
TIMER
You can use the Kitchen Timer function independently, even while a cooking
program is going on in the oven. The Kitchen Timer will be displayed
on the lower
line of the display.
Example:
To set timer for 3 minutes:
Step
Procedure
Touch KITCHEN TIMER.
1
2
3
_ Touch 3, 0 and 0 to set 3
minutes.
[(up to 99 minutes 99 seconds
Touch START.
The timer starts counting and
beeps sound for 7 seconds at
the end.
Keypad
KITCHEN
TIMER
3
0
0
Display
T I tfEP
U
Note:
To clear a Kitchen
Timer setting,
touch STOP/CLEAR.
If you are using both
Kitchen
Timer and cooking,
touch KITCHEN
TIMER
Indicator
K flashes
in the
display
for 5 seconds.
Touch STOP/CLEARwhile
the K flashes.
The Kitchen
Timer will be clear but the oven continues
cooking
to the end.
To stop beeps
of Kitchen Timer,
touch KITCHEN
TIMER.
Kitchen
Timer will not beep if the oven beeps at the same time to indicate
another
oven operation
(the end of a cooking,
for example).
If you do not enter a timer time for 10 seconds
after step 1, the setting
is
cleared
with a beep.
If a cooking
completes
while you are setting
the Kitchen
Timer,
all settings
are
cleared.
Restart
from step 1.
If no key is touched
for 5 seconds
after the last key entry at step 2 above, the
timer automatically
starts.
TIME COOKING
This basic microwave
cooking method allows you to cook food for a desired time.
In addition to the Pl00 (maximum)
power level, you can select different microwave
power from 11 levels, P 0 to P100 (0-100% of total power level).
Manual Defrosting
(Without using Auto Defrost feature):
Use power level P 30. To speed up the defrosting of dense foods over 1 Ib (450 g),
you may start on P100 for 2 minutes, then reduce to the level P 30.
Delay
Start
Cooking:
Use power
level
P 0 for the first stage of multistage
cooking.
You can delay
cooking
start
time by up to 99 minutes
99 seconds.
Multistage
Cooking
You can program
up to 3 stages of cooking in sequence.
Each stage can be
programmed
with a different power and time setting. To program 2-stage or 3-stage
cooking,
repeat the Time Cooking steps 1 to 3 and touch START. The oven
automatically
proceeds
to the end of cooking.
When you cook on P100 power for 1-stage, you must enter POWER, 1 and O.
You can not skip step 2, 3 when setting multistage cooking.

Advertisement

Table of Contents
loading

This manual is also suitable for:

565.60389

Table of Contents