Haier AW052MUCHA Installation Manual page 15

INTRODUCTION
General information
Important note: Please, check, according to the model name, which is your heat pump type, how it is abbreviated and
referred to in this instruction manual. This Installation and Operation Manual is only related to AW052/072/092MUCHA,
AW112/142/162MXCHA, AW11/14/16NMXCHA units.
AW052/072/092MUCHA, AW112/142/162MXCHA are single-phase electrical models, AW11/14/16NMXCHA are three-
phase electrical models, to fulfil central heating and cooling requirements for homes, offices, shops, etc...;
These appliances are distinguished for their high energy efficiency. They can be used as a single generator to assist the
system, but also inside an integrated system (for example, with a heat pump - boiler - solar heating). They are engineering
solutions that can be perfectly integrated with each other, which allow to attain maximum benefit from the various energy
production systems on the basis of the respective efficiency parameters.
For the entire system to operate correctly, HAIER offers an "intelligent" system Manager capable of identifying the most
economical energy source at a given time and therefore choose the right appliance to activate.
The entire range complies with the requirements of ErP Directive (2009/125/EC) and ELD (2010/30/EC). Various
hydraulic,electric and electronic kits are available, which enable flexible use in all circumstances 5kW, 7kW, 9kW, 11kW,
14kW and 16kW mono-phase inverter air/water heat pumps for winter and summer air conditioning.
The inlet pressure of the water system is greater than 0 bar and less than 3 bar.
And the outlet water temperature of the water system is 5°C to 60°C which include cooling and heating.
9