14
Pull up on the suction cup with strong, steady force to create a gap between the cover
screen and the screen module. Slide the opening pick back and forth along the right
edge to slice through the adhesive.
As the cover screen can be damaged by excessive force, be careful not to
•
damage the cover screen.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 1–2 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the cover screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
83