Side Button (Fingerprint Recognition Sensor) Remove
The buttons are already included in the screen module. Replace them only if it
•
needs to be repaired.
The Side button has a built-in fingerprint recognition sensor. Thus, it cannot be
•
removed directly from outside.
1
Check the screws at the 2 different points and remove them using a cross-head
screwdriver.
When removing the screws, be careful not to damage the battery and near
components.
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
Disassembly and Assembly
121