Reassembly for Replacement
Before reassembling:
Remove the adhesive tape residues perfectly.
•
Prepare all existing screws of this device and adhesive tapes for the back cover and
•
cover camera.
Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.
•
Leaving screws inside the device may damage internal components, such as the
•
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
The product's composition may vary depending on the country, region, or carrier.
•
Cover screen and back cover may be open or closed according to self repair parts and
•
reassembly order.
Disassembly and Assembly
124