Table of Contents
Advertisement
9
Pull up on the suction cup with strong, steady force to create a gap between the back
cover and the frame. Slide the opening pick back and forth along the right edge to
slice through the adhesive.
Leave the opening pick inserted in the right edge to prevent the adhesive from
resealing.
As the back cover can be damaged by excessive force, be careful not to damage
•
the back cover.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 3 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the back cover to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
68
Advertisement
Table of Contents
