33
@ Two screw are unscrewed on the door and the
door is disassembled.
@ The cabinet cover clamp is removed and the
gasket is released.
@ Two screws are unscrewed on the door hinge.
@ The door hinge is disassembled by pushing the
door hinge arm inside the cabinet cover.
@ The cabinet cover clamp is removed and
the gasket is released.
@ Two screws are unscrewed.
@ The Door Lock S/W is disconnected from the
wiring connector and the strap.
@ The heater is removed.
@ The foreign material(wire, coin, etc) is removed
by inserting the long bar in the hole.