* Disassemble and repair the parts after pulling out power cord from the outlet
@ The plate assy(Top) is pulled back and then
upward to arrow direction.
@ The cover(inner) is disassembled.
@ The PWB assy(Display) connectors are
disconnected.
@ Pull out drawer, three screws are unscrewed.
@ Push three upper hooks and pull the control panel
forward.
@ The PWB assy(Display) is disconnected.
@ When 9 screws are unscrewed on the PWB
insulator and the PWB assy(Display) is
disassembled from the PWB insulator.