Advertisement
7-1.Before SVC checking
= Be careful of electric shock or disconnecting the parts while trouble shooting.
Voltage of each terminal in AC 220-240V and DC while applying an electric current.
7-2.How to use this program
@ Pressing [RINSE], and [SPIN] button simultaneously.
@) Power supply ON with pressing upper two button. then buzzer sound twice.
@ Press the [START/PAUSE] button as follows.
(Press the [START/PAUSE] button more 4 times until stop spinning)
[START/PAUSE]
button | _ Checking Point
All LED on
a
Counterclockwise spin(left)
Motor rpm(About 6~14)
10 times
Auto off operation
Pressing [DOOR OPEN] button | Door Open operation
7-3.How to know the water level frequency
* Press the [WASH] and [RINSE] button simultaneously.
The last two digits means water level frequency(10" Ktz)
The first digit means the number of water inlet.
ex) 641 : Water level frequency = 241 x 10" Kiz( '2' is ommitted)
'Ly Water is supplied 6 times.
16
Advertisement
