Table of Contents
Advertisement
NN-6207, NN-6307, NN-6407
NN-6507, NN-6567, NN-6607, NN-6757
NN-6707, NN-6807
DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE
1. To Set Clock
Plug the power supply cord into walt re-
ceptacle.
Tap Clock Pad
Enter time of day (TOD) by tapping
appropriate number pads.
Exampie: To Set 11:25
* Tap 10 min pad once
= Tap 1 min pad once
Tap 10 sec pad twice
Tap 1 sec pad 5 times
Tap Clock Pad
Tap Power Pad once for High power (ist
stage)
Set for 5 seconds by tapping Number
Pad
Tap Power Pad four times for Low power
(2nd stage)
Tap Start Pad
¢ Colon turns on.
« Colon starts blinking.
« "11:25" appears in the display window.
* Colon keeps blinking.
* Colon stops blinking and stays on.
* TOD has now been registered into the digital programmer circuit and
will count up by minutes.
* Clock time disappears.
¢ High power indicator light tums on.
¢ Cooking time "5" appears in the display window.
« First stage cooking time "5" and High power indicator light disappear.
« Low power indicator light turns on.
« Cooking time "10" appears in the display window.
¢ Second stage cooking time "10" and Low power indicator light dis-
appear.
« First stage cooking time "5" appears and counts down.
¢ High power indicator light appears and starts blinking.
* Oven lamp and fan motor turn on.
¢ Microwave activity starts.
Advertisement
Table of Contents
