Samsung HMX-Q20BN User Manual page 77

Connecting to a WLAN and configuring netwo_k settings
Configuning the network settings
You can configure network settings manually, Note that configuring
these settings manually is not necessary in most cases. If your
camcorder connected to the network after you followed the directions
on page 72, your camco_der has adjusted these settings and you do
not need to configure them manually.
7 Press the [Home (1_)] button - touch Social Sharing.
2 Touch theWi-Fisetting( _ )tab.
° The camcorder automatically searches for available AP devices.
.... Touch the tab next to an AP.
Touch the tab.
° The camoorder connects to the network via the selected AP.
_@" ° Even IfAP autherltlcatlon and Data Er srypuen nave been aetectea
set I te authentication rhode to Open or Shared,
f the csmcoreer aces lot oetect the AP automatically, yoL cart se;
the nelwolk propertbs directly, _page 74
- Data enorypt_on se_ngs Dy autnent_oat_on [ype are De_ow
• Open _ Disabled orWEP
Shared _ WEP
WPA-PSK _ TKIP. AES, or TKIP/AES Mixed
- vvnen the Data Encryptlorl funct xt is set to WEP or TKIP for
902,11 n AP eonrlectle ou cart access lit tne 802,11 _ "- sue
n the 802,1 g _toae, tne newvorK connection arlr_ s oeea are no_
]aJ-anteec
Samsung 1 "_"
Samsung 2
S....... g3
Samsung 4
// Touch each submenu and enter the required information.
Select an authentication type according to your AP's selting,
Authentication When you select Open or Shared, WPA is automatically
set,
Data Encryption Select an encryption type according to your AP's selting
Network
Password Enter the password using the virtual keyboard, _page 75
The default is Auto You can select Manual to set the IP
IP Setting
address manually,
Wireless network (HMX QF20 only)
73