Samsung HMX-Q20BN User Manual page 120

Recording
During recording, the date/time does not
display,
You cannot record a photo image,
o
You don't hear the shutter sound when you .
record a photo image.
You don't hear the beep sound,
There is a time difference between the pohqt •
where you press the [Recording start/stop]
button and the point where the recorded video
starts/stops,
o
Horizontal stripes appear on the images.
,, Date/Time Display is set to Off. Set the Date/Time Display to On. _page 102
, Set your camcorder to the photo recording mode. '-_page 41
, Release the lock on the wnte protection tab of the memory card if ar/y.
, The storage media is full. Use a new mernory card or forrnat the storage media.
"_page 106 Or remove unnecessary images. '-page 65
Set Shutter Sound to On.
When the micro HDMI cable or Audio/Video cable is connected to the carncorder, the
Shutter Sound is disabled temporarily.
- Set Beep Sound to On,
- The Beep sound is turned off ternporarily when you record videos.
, When the rnicro HDMI cable or Audio/Video cable is connected to the carncorder, the Beep
Sound is disabled temponsrily.
On your camcorder, there may be a slight time delay between the point where you press the
[Recording start/stop] button and the actual point where the recorded video starts/stops.
This is not an error.
This can occur when recording images under a fluorescent lamp, sodium lamp, or mercury
lamp. This is not a rnalfunction.
Appendixes JIG