Table of Contents
Advertisement
COMPOSER PLAY/STOP:
The switch will serve as a Play/Stop button for
the Composer. Performance data will either
start playing or stop with each press of the
switch.
DAMPER OF UPPER:
While the switch is pressed, only the Upper key-
board notes will be sustained.
9 Pedal Bass Mode
Specify whether the bass sound will be able to
play multiple notes or whether it will be
restricted to single notes.
MONOPHONIC:
the same as pressing the relevant buttons on the
POLYPHONIC:
panel.
Multiple notes can be sounded.
SUME
T
.
€ Bender/Vibrato Destination
e Left
/ Right Foot Switch
Assignment
This setting specifies which Section (from the fol-
You can select any of the following functions
.
lowing three) you wish to have the effect applied
and assign them to the foot switches on both
sides of the expression pedal.
UPPER:
The effect is applied to the sound played on the
Upper keyboard.
* You cannot assign the same function to both the
LOWER:
left and right switches.
:
The effect is applied to the sound played on the
GLIDE
Lower keyboard.
ROTARY FAST/SLOW
PEDAL BASS:
LEADING BASS
The effect is applied to the sound played on the
RHYTHM START/STOP
porem
COMPOSER PLAY/STOP
e Pitch Bend Range
INTRO/ENDING
FILL IN TO VARIATION
This setting allows you to choose the maximum
amount of change (range) permissible when
FILL IN TO ORIGINAL
using pitch bend. The range can be set any-
ADVANCED/BASIC
where between 1-12 (in semitone units; maxi-
DAMPER OF UPPER
mum of one octave).
GLIDE:
This feature temporarily lowers the pitch, then
e
cussion are fixed at one octave, regardless of
LEADING BASS:
this setting.
The Leading Bass function will be active only
while you are pressing the switch.
52
Advertisement
Table of Contents
