Pa Ao - Roland AT90 Owner's Manual

Troubleshooting
@ When you press the POWER switch,
power doesn't come on.
Q Power cord is not connected correctly
(p.11).
€ Sound is not produced
(4 The Master Volume slider is set too low
(p.14).
"1 Headphones are connected (p.11).
(J The volume is set too low as a result of the
Part Balance buttons (p.48).
A The volume is set too low because of the
expression pedal (—p.14, 32).
_ You do not have a Voice selected (—p.16-19).
Q The pedal cord is not connected correctly
(p.11).
- Manual Drums is turned on, and you are
playing keys to which drums or sound
effects have not been assigned(— p.30, 64).
€ Pedals don't work
(4 The pedal cord is not properly connected
(p.11).
(J The damper pedal affects only the Lower
keyboard. It won't work for the Upper key-
board and pedal board (p.32).
1 While playing back performance data con-
taining data directed at the expression pedal,
the pedal will not be able to provide its nor-
mal response when you step on it.
€ When you release your fingers from
keys in the Lower keyboard while
Automatic Accompaniment + Rhythm
is playing, the rhythm performance
alone remains playing.
{ Chord Hold is at OFF (p.53).
€ When you release your fingers from
keys in the Lower keyboard, the
notes continues sounding.
Q Lower Voice Hold is at ON (p.39).
€ Even though you press only one key,
a multiple number of notes sound.
Q Harmony Intelligence is at ON (p.21).
( Chord Intelligence is turned ON (p.53).
€ Automatic accompaniment sounds odd
Q The keys for a chord were not pressed simul-
taneously.
( Even though Chord Intelligence is OFF, you
think it is ON, and are abbreviating chords
(p.38).
Q If performance data for other than the AT-90
is played simultaneously with the automatic
accompaniment, the automatic accompani-
ment may not sound as normal. This is not a
malfunction.
€ Rhythm sounds odd
1 If performance data for other than the AT-90
is played simultaneously with the rhythm,
the rhythm may not sound as normal. This is
not a malfunction.
O Pitch is off
2 A transpose is in effect (p.49).
3 The tuning is incorrect (p.54).
2 While set for an octave shift, you are playing
keys beyond the recommended range. This
does not indicate a malfunction (p.48).
€ Performance data cannot be played
back
Q While the Function menu appears in the dis-
play (with the exception of Channel Mute),
playback is not allowed.
O Cannot record
© While the Function menu appears in the dis-
play, recording is not allowed.
€ Sound of metronome is strange
F If the metronome is sounded while a Standard
MIDI File is played back, the metronome can
sometimes sound different than usual. This
does not indicate a malfunction.
61