O Sustain effect
Sustain allows you to have Voices sustained (held). The sustain effect can be
obtained for the Upper (except the Solo Voice), Lower, and Pedal Bass Voices.
mM
Upper
< Press the Sustain button for the keyboard to which you wish to apply Sustain (indi-
cator lights).
Sustain
| Pedal
H
Li
Bass
y Lower i
* The length of sustain can be modified independently for each keyboard. (—=p.50)
Try out the performance functions
Here's how to use the performance functions other than Harmony Intelligence.
O Adjusting overall volume using the Expression pedal
When you depress the expression pedal, the volume increases. the volume is low-
ered as you close the pedal.
decrease
the volume
increase
M
the volume
`
* This cannot be used to control the playback of musical data that was not created by
the AT-90 (only when playing back directly from disk).
* You can adjust the amount of effect that is produced when the pedal is pressed.
(p.53)
€ Adding decay to the sound (Damper or Sustain pedal)
<> When you depress the pedal, the damper effect is applied to the Voice played on the
Lower keyboard.
*
If the To Lower and Bass Split indicators are lit, no decay will be added to the Solo
voice and Bass voice played on the Lower keyboard. (p.33)
32