Advertisement
2002 Volvo C70 Coupe & Convertible
Buttons 2 and 3 can be programmed in the same way. To move the seat to a programmed position,
depress button 1, 2 or 3 until the seat stops.
If the button is released before the seat has reached the programmed position, the seat will stop as a
safety precaution.
NOTE: The seat has an overload protector which engages if an object blocks the movement of the seat.
If this happens, remove the object and wait 20 seconds before operating the seat again.
WARNING!
Do not adjust the seat while driving. The seat should be adjusted so that the brake pedal can be
depressed fully. In addition, position the seat as far rearward as comfort and control allow. The seat
rails on the floor must not be obstructed in any way when the seat is moved.
Movement of the seat can be STOPPED at any time by pressing any button on the power seat
control panel.
pg. 51 Front seats
Tilting the backrests - moving the seats
Tilting the backrest
The backrests are locked in the upright position and can be tilted forward to allow access to the rear seat.
1. Lift the control lever on the side of the front seat (A)
2. Tilt the backrest forward until it locks into place to reach objects in the rear seat.
Moving the seat forward
1. Lift and hold up the control lever on the side of the front seat (A).
2. Tilt the backrest forward (B).
Electrically operated seats: The seat will slide forward until the control lever is released or until it
file:///K|/ownersdocs/2002/2002_C70/02c70c_03a.htm (15 of 17)12/30/2006 3:53:50 PM
Advertisement
Chapters
