Kenwood KDC-9011 Instruction Manual page 20

CD/External disc control features
@ When a unit equipped with an O-N switch is to be connected,
please also see the instruction manual of this unit.
Set the O-N switch to "N". "N"-operation will be set.
@ When a unit that is not equipped with an O-N switch, or the
changer switching unit "KCA-S200" is connected, "O"-
operation will be set.
-operation:
¢ The disc title and track title of the CD text can be displayed.
¢ The disc name will be displayed when the name has been
registered to any connected unit with the Presetting Disc
Names function, or when the playing unit contains a disc to
which the disc title has been recorded.
"O"-operation:
¢ CD text cannot be displayed.
¢ Regardless of the control unit, the characters that can be
registered with the Presetting Disc Names function are "A~Z
0~9 /,+,-.%,=,<,>,6,]".
e The disc name will be displayed when the name has been
registered to the playing unit with the Presetting Disc Names
function.
The CD text, Presetting Disc Names, and Disc Name Preset Play
functions may not be operational depending on the unit.
Playing CDs
Play:
Press the §®*(EJECT) button to slide open the faceplate,
showing the CD (insertion) slot. Holding the CD with the
labeled side facing up, insert it in the slot. The faceplate will
show the control panel, and the CD will start playing.
The $ IN 8 indicator will light when a CD has been inserted.
Playing CDs Already inserted:
Press the SRC button repeatedly to select the CD mode.
"CD' is displayed when the CD mode has been selected.
- The CD will start playing.
Pausing and Restarting CD Play:
Press the »4#§ button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the §S®(EJECT) button. The faceplate will slide to eject
the CD.
Press the I®*(EJECT) button to show the control panel.
© Do not attempt to insert a CD into the slot if another one is |
already there.
¢ The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will
get stuck inside and'can cause the unit to malfunction.
e The sound will be temporarity muted while the faceplate is
moving.
¢ The only buttons that will work during the eject state are the
§>(EJECT), SRC, and ATT buttons, as well as the volume
control button.
¢ When you load a CD and eject it right away, the next time you
try to insert the CD may not foad. In such a situation, take the
CD out for a moment and then reinsert it.
Playing Other Disc mode
This function permits the connection of optional players and
the playing of discs other than the loaded CD {in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode. '
The disc will start playing.
The external disc contro! mode will differ, depending on the unit
that is connected.
Mode Display Examples
°"CD2"...when a CD player is connected
— 20 —