Kenwood KDC-9011 Instruction Manual page 5

Safet
- |AWARNING
To prevent injury or fire, take the
following precautions:
e When extending the ignition, battery, or
ground wires, make sure to use automotive-
grade wires or other wires with a 0.75mm'
(AWG 18) or more to prevent wire
deterioration and damage to the wire coating.
¢ To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
_ elf the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
The unit may-break or crack because it
contains glass parts.
with soap immediately.
Na?
recautions
ACAUTION
To prevent damage to the machine,
take the following precautions:
¢ Make sure to ground the unit to a negative
12V DC power supply.
* Do not open the top or bottom covers of the
unit.
* Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
* Do not subject the faceplate to excessive
¢ To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
* Do not place any object between the
faceplate and the unit.
IMPORTANT INFORMATION
You cannot connect the unit directly to the
following CD automatic changers. If you want
to use older changers with the unit, follow
the directions below according to the type of
changer you own:
* KDC-C200 / KDC-C300 / KDC-C400
Use the extension cable and the control box
attached to the CD changer, and the optional
CA-DS100 converter cord.
* KDC-C100 / KDC-C302 / C205 / C705 /
non-Kenwood CD changers
Cannot be used with this model.
ACAUTION
You can damage both your unit and
the CD changer if you connect them
incorrectly.
If you try to load a 3 in. CD with its adapter
into the unit, the adapter might separate from
the CD and damage the unit.