Philips 55OLED936/96 User Manual page 55

Smart display
Table of Contents

Advertisement

HDMI is distorted, connect the device to another
HDMI port on the display and power reboot your
source device.
• If the picture and sound of a device connected with
HDMI is distorted, check if a different HDMI Ultra
HD setting can solve this problem. In Help, press the
colour key
Keywords and look up HDMI Ultra
HD.
• If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI
cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
HDMI EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
• When an HDMI-CEC audio device is connected and
you use the Display's Remote Control to adjust the
volume level from the device, this behaviour is
normal.
Photos, videos and music from a USB device do not
show
• Make sure that the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Make sure that the USB storage device is compatible
with the display.
• Make sure that the audio and picture file formats are
supported by the display.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the display which
causes poor playback.
Network
Wi-Fi network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n/ac devices in your proximity might
disturb the wireless network.
• Make sure that the firewalls in your network allow
access to the display's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Poor quality when watching streaming video
• The image/sound quality of stream video is
depending on the original video content provided by
streaming video apps.
• To ensure the best experience of watching
streaming videos, a fast and stable network
connection is essential. The recommended network
connection speed for the streaming videos are as
follows:
- Standard image quality (SD): 5 Mbps
- High image quality (HD): 10 Mbps
- 4K/Ultra HD (UHD): 25 Mbps
Bluetooth
Unable to pair
• Make sure the device is in pairing mode. Read the
user manual of the device.
• Keep the wireless speaker as close to the display as
possible.
• Trying to pair several devices with the display at the
same time, may not work.
Bluetooth lost connection
• Always position the wireless speaker within a range
of 5 meters from the display.
Bluetooth Audio and Video syncronisation
• Before you purchase a wireless Bluetooth speaker,
inform yourself about its quality of Audio to Video
syncronisation, commonly called 'lip sync'. Not all
Bluetooth devices perform correctly. Ask your dealer
for advice.
Wrong Menu Language
Wrong menu language
Change the language back to your language.
1 - Press  HOME to go to Home screen .
2 - Select the  icon (Settings) from System bar on
the top of Home screen and press OK.
3 - Press 5 times  (down).
4 - Press 3 times  (right), select your language and
press OK.
5 - Press  Back to close the menu.
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oled936 series65oled936/96

Table of Contents