Table of Contents
Advertisement
Subwoofer out
Settings > Sound > Advanced > Subwoofer out.
Select On/Off to enable/disable Subwoofer output.
Please ensure Subwoofer device is connected to the
display. For connection, please refer to Connect
Devices > Subwoofer of the manual.
Centre speaker volume
Settings > Sound > Advanced > Centre speaker
volume.
Adjust the loudness level of display centre speaker if
the centre speaker is available on your display.
Height speaker volume
Settings > Sound > Advanced > Height speaker
volume.
Adjust the loudness level of display height speaker if
the height speaker is available on your display.
Audio Out Settings
Audio out
Quick Menu > Frequent Settings > Audio out.
Set the display to play the sound on display or on
the connected audio system.
You can select where you want to hear the display
sound and how you want to control it.
• If you select TV speakers off, you permanently
switch off the display speakers.
• If you select TV speakers, the display speakers are
always on.
With an audio device connected with HDMI CEC,
select HDMI sound system. The display will switch
off the display speakers when the device is playing
the sound.
If there is a Bluetooth speaker already paired with
your display, it will be available on the audio out
device list with its device name.
When the DTS Play-Fi compatible device is
configured correctly and switched on, you can select
Play-Fi Wireless Home Theater to set it as audio out
device.
eARC
Settings > Sound > Advanced > eARC.
Set eARC mode to Automatic or Off.
Digital Output Settings
Digital output settings are available for optical and
HDMI ARC sound signals.
Digital out format
Settings > Sound > Advanced > Digital out
format.
Set the audio out signal of the display to fit the sound
capabilities of the connected Home Theatre System.
• Stereo (uncompressed): If your audio playback
devices have no multichannel sound processing,
select to only output stereo content to your audio
playback devices.
• Multichannel: Select to output multichannel audio
content (compressed multichannel sound signal) or
stereo audio content to your audio playback devices.
• Multichannel (bypass): Select to output Dolby
Digital Plus or DTS content to your audio playback
devices or Home theatre system.
- Make sure your audio playback devices support
Dolby Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will be
disabled when streaming Dolby Digital Plus content.
Digital out levelling
Settings > Sound > Advanced > Digital out
levelling.
Adjust the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Digital out delay
Settings > Sound > Advanced > Digital out
delay.
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. Select Off if a sound delay is set on
your Home Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
Settings > Sound > Advanced > Digital out
offset.
If you cannot set a delay on the Home Theatre
System, you can set the display to sync the sound.
You can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the picture. You can set the value in
steps of 5ms. Maximum setting is 60ms.
29
Advertisement
Table of Contents
