Important Safety Instructions - Pioneer VSX-D507S Operating Instructions Manual

Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them awey in
a safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory drawings. However the method of con-
necting and operating the unit is the same.
WARNING: to PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THE POWER SWITCH IS SECONDARY CONNECTED
AND THEREFORE DOES NOT SEPARATE THE UNIT
FROM MAINS POWER IN STANDBY POSITION.
TWO VOLTAGE SELECTOR SWITCHES |
Mains voltages in Saudi Arabia are 127 V and
220 V only. Never use this model with the 110
V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel.
Check that they are set properly before plugging the power
cord into the household wail socket. If the voltage is not
properly set or if you move to an area here the voltage
requirements differ, adjust the selector switches as fol-
lows.
1. Use a medium-sized screwdriver.
2. First, insert the screwdriver in the groove of the volt-
age selector at the left, and adjust so that the tip of the
groove points to the voltage value of your area.
3. Next, insert the screwdriver in the groove of the volt-
age selector at the right and adjust until the voltage is
the same as at the left.
wr TWO VOLTAGE SELECTORS
410V
120-127V
5
Medium-sized screwdriver
[ CHANNEL STEP SETTING |
The unit has been factory preset to the channel alloca-
tion value for the area in which it is to be sold. If this
value js set incorrectly, the tunes in frequency may be
wrong, or sound may be distorted, resulting in an inabil-
ity to reproduce reception signals at their proper sound
quality. For this reason, be sure to confirm that the val-
ues are set correctly before first using the unit.
FM.100 kHz,-AM 10 kHz:..-
Set to this position for areas with an FM reception atep of
100 kHz and AM 10 kHz.
FM 50 kHz, AM 9 kHz:
Set to this position, for areas with an FM reception atep
of 50 kHz and AM 9 kHz.
NOTE:
When unsure about the channel allocation for your area,
consult your dealer for correct information.
To Change Channel Steps
With the power turned OFF, hold the FM/AM function
button depressed while pressing the STANDBY/ON but-
ton to turn the power ON.
@ Each time the above operation is performed, the chan-
nel tuning step will alternate between FM 100 kHz/AM
10 kHz, and FM 50 kHz/AM 9 kHz.
STANDBY/ON
FM/AM
2 0
° 9-0-0
Manufactured under license from the Dolby Laborato-
ties Licensing Corporation.
DOLBY, the double-D symbol QJ and "PRO LOGIC"
are trademarks of Dolby Laboratories Licensing Cor- |
poration.
The words "TRUSURROUND", "SRS", "Sound Re-
trieval System" and SRS symbol (@) are trademarks
-of SRS Labs, Inc. Made under license from SRS Labs,
Inc. Patented in the USA and selected countries. Pur-
chase of this product does not convey the right to sell
recordings made with the Sound Retrieval System.
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver,
i
2
<ARE7 166>
En
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and.on, the user is een sare to. au to.correct the interference by one or more of the
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT
The ligntning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persans.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the Hterature
accompanying the appliance.
READ INSTRUCTIONS — All the safety and operating
instructions should be read before the product is
operated
RETAIN INSTRUCTIONS — The safety and operating
instructions should be retained for future reference
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed
CLEANING — Unplug this product from the wail outlet
before cleaning. The product should be cleaned only
with @ polishing cloth or a soft dry cloth. Nev jean
with furniture wax, benzine, insecticides
volatile liquids since they ray corrode the cabinet
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as they
may cause hazards
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub,
bow! kitchen sink, or laundry tub, inawethasernont
or near a swimming pool, and the like
ACCESSORIES — Do not piace this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer
CART — A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn
other
wash
hs |
far \es
VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa. rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
tack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to
POWER SOURCES — This product should be operated
only from the type of power source indicated on the
marking label. f you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
LOCATION - The appliance should be installed in a
stable location
NONUSE PERIODS - The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time
IMPORTANT SAFETY INSTRUCTIONS ——
GROUNDING OR POLARIZATION
@ = Ifthis product is equipped with a polanzed alternating
current fine plug {a plug having one blade wider than
the other), it will fitinto the outlet only one way. This
isa safety feature. {fyouars unable to insert the plug
fully into the outlet, try r sing the plug. If the plug
sho: stil fail to fit. contact your electrician to
replace your obsalete outlet. Do not defeat the
safety purpose of the polarized plug
@ ff this product is equipped with a three-wire
groundi having a third {grounding}
pin. it only fit intoag nding type power outlet
Thisisasatety feature. Hf ym
plug into the outlet,
ve unable tainsert the
niact your. electrician to
replace your lete outlet. Do not defeat the
safety purpose of the g rding type plug
POWER-CORD PROTECTION — Power-supply cords
should be touted so that they are nat likely to be
walked on or pinched hy items placed upan or
against them, paying partenlar attention to cords at
nlugs, convenience receptacies, and the paint where
they exit from the product
OUTDOOR ANTENNA GROUNDING — If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Article 8 10 of the National
Electrical Code, ANSI/NF PA 70, provides information
with regard ta proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes. and
requirements for the grounding electrode. See Figure
A
LIGHTNING — For added protection for this product
during a lightning storm, or when itis left unattended
and unused for tong periods of time, unplug it fram
the wall outlet and di inect the antenna or cable
system. This will pr nt damage to the product
due to hightning and power-line surges
POWER LINES — An outside antenna system should
notbe located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or citcuits, When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience receptacles
as this can result in a nsk of fire or electric shock
OBJECT AND LIQUID ENTRY — Never push objacts of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock
Never spill liquid of any kind on the product
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may axpose
you to dangerous voltage or other hazards, Refer all
servicing to qualified service personnel
DAMAGE REQUIRING SERVICE — Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following canditions
@ When the power-supply cord of plug is damaged.
@ = If liquid has been spilled, or objects have fallen into
the product
@ ifthe product has been exposed to rain or water
@ = ifthe product does not operate normally by following
the operating instructions, Adjust only those contrals
that are covered by the operating instructions as an
improper adiusiment of athar controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
@ |f the product has bean dropped or damaged in any
way.
@ When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement parts
are required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may resultin fire, elactric
shock, or other hazards
SAFETY CHECK — Upon completion of any service or
repairs to this product, ask the service technician to
nerform safety checks to determine that the product
is in proper operating condition
WALL. OR CEILING MOUNTING — The product should
not be mounted to a wall or ceiling.
HEAT — The product should be situated away from heat
sources such as radiators, heat registers, Stoves, or
other products (including amplifiers) that produce
heat
*
_ ANTENNA
a" LEAD IN
WIRE
GROUND
. CLAMP
We
=
renee ee
ELECTRIC
i> SERVICE
~~ ___ EQUIPMENT
ee
ANTENNA
4° DISCHARGE UNIT
{NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
Fame POWER SERVICE GROUNDING
ELECTRODE SYSTEM
{NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
3
<ARE7166>
En