Product Overview; Controls - Toro 74732 Operator's Manual

Product Overview

1. Grass deflector
2. Rear drive wheel
3. Motion-control levers

Controls

Become familiar with all the controls in
Figure 5 before you start the engine and operate the
machine.
Control Panel
1. Throttle
2. Ignition switch
4. Height-of-cut lever
5. Operator seat
6. Smart Speed™ lever
Figure 4
Figure 5
3. Blade-control switch
(power takeoff)
Figure 4
7. Footrest
8. Engine
9. Fuel-tank cap
Ignition Switch
Use this switch to start the mower engine. It has 3
and
positions: S
TART
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
g027890
Park Position
Move the motion-control levers outward from the
center to the P
(Figure 18). Always position the motion-control levers
into the P
ARK
leave it unattended.
11
10. Control panel
11. Engine guard
12. Front caster wheel
, R , and O .
UN FF
5).
position when exiting the machine
ARK
position when you stop the machine or
g027933
to F
LOW AST
(Figure 5).