Table of Contents
Advertisement
8.
Remove the two Phillips M2.0 × 3.0 screws (1) from the top display bracket, and then remove the
bracket (2) from the display back cover.
9.
To remove the hinges from the display rear cover:
a.
Remove the three Phillips M2.5 × 2.5 broad head screws (1) from each hinge.
b.
Remove the hinges (2) from the display back cover.
The display hinges are available as spare part number N85236-001.
10.
To remove the camera module:
a.
Disconnect the cable from the ZIF connector (1) on the camera module.
Display assembly
49
Advertisement
Table of Contents
