Power Supply - Philips ACT200 - annexe 1 Manual

8 power supply

battery
press 4 to open the battery cover latch and insert
1
one AAA /UM4 /LRO3 battery (preferably
alkaline) or Ni-MH rechargeable as indicated.
2
insert the lower edge of cover as shown to close
the battery cover latch.
beep beep! indication of empty battery
when the power level is almost empty, the psa64 will
beep at intervals and the inidicator lights up red. the psa will eventually switch
itself off. always replace the battery after the first battery
warning beep is heard.
IMPORTANT!
– remove the battery if: battery drained or the psa
will not be used for more than two weeks.
– batteries contain chemical substances, so they should
be disposed of properly.