Power Supply - Philips ACT210 Product Manual

8 power supply

battery
press 4 to open the battery cover latch and insert
1
one AAA battery preferably alkaline, or Ni-MH as
indicated.
2
insert the lower edge of door as shown to close the
battery cover latch.
IMPORTANT!
– remove the battery if: battery drained or the psa
will not be used for more than two weeks.
– batteries contain chemical substances, so they
should be disposed of properly.
indication of empty battery
the number of blocks inside the battery icon
indicates the battery power remaining. when the
battery is low, the battery icon flashes. if no action
is taken to renew the battery, the display shows
BAT LOW! 5 seconds later the psa automatically
switches off.