Table of Contents
Advertisement
1-7. CONNECTIONS
OPTIONAL AUDIONIDEO CONNECTING CABLES
The optional connecting cables to be used for connect-
ing other equipment depend upon what type of audio
and video jacks the equipment you desire to connect
has. The following charts will help you choose which
cable you should use.
Cables to be connected to the VIDEO 1 and 3 INPUT
jacks
The type of audio and
video jacks of the equip-
Connecting cable to be used
ment to be connected.
Video
Audio (L, R)
VMC-1P3 (1 m)*
(phono-type)
(phono-type)
~
@
@) @
Video
Audio
VMC-1MP3 (1 m),
(phono-type)
(mini-type)
~
@)
©
Video
Audio
(phono-type)
(phono-type)
~
@)
@)
*
Use the optional VMC-2P3 (2 m) if the cable is too short.
Cables to be connected to the VIDEO 2 IN and TV OUT
(AV type) jacks
The type of audio and
video jacks of the equip-
Connecting cable to be used
ment to be connected.
Video
Audio (L, R)
(phono-type)
(phono-type)
~
@)
@) @)
Video
Audio
~
(phono-type)
(phono-type)
~·
@)
@)
•The PC-21 is supplied
to the cable for a mini-type
audio input.
The following are few examples of the possible connec-
tions.
NOTES ON CONNECTION
• Before connecting, make sure that the power to
each piece of equipment"is turned off.
• The plugs should be fully inserted into the jacks. A
loose connection may cause hum and noise.
• Match the color when connecting the plugs to the
jacks.
-13-
KV-25DXR
RM-727/APM-X3U
1-8. SELECTING THE VARIOUS AUDIO AND
VIDEO SOURCES
VIEWING THE PICTURE OF THE EQUIPMENT
CONNECTED TO THE VIDEO 1/3 INPUT
or VIDEO
2 IN UNICONNECTOR
(If the "RGB" indicator is lit, press RGB button to turn it
off.)
Press the TV/VIDEO button until the "VIDEO 1, 2 or 3"
indicator of the VIDEO input jacks from which you
desire the signals to come from appears.
The VIDEO lamp will light up.
'
I
/
-uIDEO 1
/
I
\
----
I
I
oocorr:1': :
0
o
I
VIDEO lamp
The picture of
the selected
VCR
Every time you press the TVNIDEO button, the display
will change as follows:
VIDEO 1
-+
VIDEO 2--+ VIDEO 3
*
--+ TV channel
Adjust the volume with the VOLUME buttons.
* Set VIDEO 3/EXT-AUDIO selector on the rear panel to
"VIDEO 3" if "EXT-A" appears.
The channel number buttons on the Remote Com-
mander or the channel scan buttons will not func-
tion while the VIDEO lamp is lit.
TO LISTEN TO THE SOUND OF THE AUDIO
SOURCE CONNECTED
TO THE EXTERNAL
AUDIO JACKS
1
Set VIDEO 3/EXT-AUDIO selector to "EXT-AUDIO".
2
Press TV/VIDEO button as many times as necessary
until the on-screen "EXT-A" appears.
Advertisement
Table of Contents
