Table of Contents
Advertisement
1-6. APPLICATIONS WITH OTHER OPTIONAL
EQUIPMENT
This unit is equipped with various input/output jacks
and terminals for your desired equipment to be con-
nected.
For details on the various optional connecting cables to
be used, see "OPTIONAL AUDIO/VIDEO CONNECTING
CABLES" on page 13.
Front
Rear
0 0
a
□ □
o
□
0
□
0
VIDEO 2 IN (input)
AV uniconnector
8
TV OUT (output) AV jack
RGB MUL Tl INPUT connector
Q
VIDEO 1 INPUT jacks
VIDEO 3 INPUT jacks
External audio (L, R) jacks
8
MONITOR OUTPUT
jacks
~
'&
0
VIDEO 3/EXT(external)•AUDIO selector
O
VIDEO 2 IN (input) AV uniconnector (AV jack)
Connect to the video and audio output jacks of .a
video cassette recorder or microcomputer. Video and
audio signals are transmitted simultaneously.
f) TV OUT (output) jack (AV jack)
Connect to the video and audio input jacks of a video
cassette recorder to record the output of the TV's
built-in tuner. The TV tuner output will always be sup-
plied even while other input signals are being viewed
on the screen.
To record a TV program while viewing another video
source
1
Select the TV channel you desire to record.
2
Start recording on the VCR.
3
Press either TV/VIDEO button or RGB button to
select the desired source to be displayed.
KV-25DXR
RM-727/APM-X3U
Note
• The TV channel (and therefore the output of this jack) will
change if you press the channel number or CHANNEL
scan buttons even while the on-screen "RGB" indicator
or RGB lamp is lit.
• The TV channel cannot be changed when the on-screen
"VIDEO" indicator or VIDEO lamp is lit.
8
RGB MUL Tl INPUT connector (34-pin jack)
This connector allows direct RGB hook-up to a
microcomputer having RGB output.
When connecting the microcomputer, use a connect-
ing cable with a 34-pin plug that will match the RGB
output of the equipment to the pin assignment of this
connector designated on page 2.
leads
G
VIDEO 1 INPUT jacks
0
VIDEO 3 INPUT jacks
To connect a cable with loose
signal leads instead of a plug, use
an optional PX-34 RGB multi con-
nector. For details on the arrange-
ment and the connection of the
leads, read the instruction manual
of the PX-34.
Connect to the video and audio output jacks of a
VCR*, video disc player, etc.
~--
VIDEO jack ___
to video output jack
':::.I
(phono, yellow)
~--
AUDIO L jack __
~
to audio L (left channel)
':::.I
(phono, white)
output jack
lo\--
AUDIO R jack____,.
to audio R (right channel)
\:;:,I
(phono, red)
output jack
If you connect an audio source to ihe AUDIO L jack only, you
will be able to hear the monaural sound received through this
jack from both speakers.
*
You will achieve better picture and sound quality than by
connecting the VCR only to the antenna terminal.
0
External audio (UR) jacks
An external audio source can be connected to these
jacks to be combined with the picture of the selected
TV program. Connect to the audio/line output of the
audio source.
To view FM simulcasted programs.
-11-
Advertisement
Table of Contents
