Table of Contents
Advertisement
of F Chord
TUNEMMIOI
LOCAL CONTROL (Default; on)
i
E-72
To make MIDI settings on the piano
J. Press the TUNE/MIDI button.
2. Use the [A] and [¥] CURSOR keys to display 'he MIDI
screen for the setting you want to make, as showr in
the next page
Tuning screen [page E-33)
MIDI settings
LOCAL CONTROL On
LOCAL CONTROL Off
Notes played on the keyboard are
output as MIDI messages form
the MIDI OUT terminal, but not
sounded directly by the internal
sound source. The MIDUTERU
terminal of the connected device
can be used 10 return the MIDI
message and sound it on this pi-
ano's sound source.
nal.
MIDI OUT terminal
Bulk send, receive (page E-76)
3. Use the {+] and [-) buttons to change the setting.
* Settings you make are applied even if you do not press the
ENTER button
* Pressing the [~] button whi:e the "GM On?" message 1s dis-
playec serés 2 GM ON message from the MIDI terminal and
initializes the Mixer's external channel
4, Press the TUNE/MIDI button to clear the setting
screen. The setting screen also clears automatically if
you do not perform any aperatian far about five sec-
'onds.
MIDI Messages
There is a wide variety of messages defined under the MIDI stan-
dard. This section details the particular messages that can be sert
anc received by this piano. An asterisk () is used to mark messages
that affect the entice keybcard, while messages without ar, asterisk
are those that aftect only a particular channel.
NOTE ON/OFF
ANOTE ON/OFF message includes a note number (to indicate the
note whose key is being pressed or released) and velocity (keyboard
Pressure as a vaiue from 1 to 127). NOTE ON velocity is always used
to determine
the relative strength of the note. This piano does nat
receive NOTE OFF velocity data.
Pressing a keyboard key sends the corresponding NOTE ON mes-
sage from the MID! OUT terminal, while releasing the key sends the
corresponding NOTE OFF message.
so0n-b077
bret
ety
oar rennet _ nore on
~~,
pis
+ Note number (tone)
Sed
Qe
Relesse the key
5
MIDI OUT Terminal
<5
Ee
NOTE OFF
* Note number (tone)
+ Velocity (00)
ENOTES
The pitch of a note depends on the tone that is being used, as shown in
the "Tone List" on page A-1. Whenever this piano racoives a note number
that is outside its range for that tone, the same tone in the nearest avail-
able octave is substituted.
PROGRAM CHANGE
This is the tone select message. PROGRAM CHANGE can contain
tone data within the range of 0 to 127.
A PROGRAM CHANGE message is sent out though this piano's
MIDI OUT terminal whenever you manually change its tone num-
ber. Receipt of a PROGRAM CHANGE message from an external
device changes the tone setting of this piano.
PITCH BEND
This message carries pitch bend information 'or sliding pitch upwards
or downwards during keyboard play.
CONTROL CHANGE
This message adds effects sch as vibrato and volume changes. CON:
TROL CHANGE data includes a control rumber (10 rdeatity the ef-
fect type) and a control value (to specify the on/off status and depth
of the effect),
The folowing is a list of data that can be send or received using CON-
TROL CHANGE,
BANK SELECT"
Modulation
Volume
Pan
Expression
Hold1
64
Sostenuto
ho
| __ Soft Pedal
[ew
Effect depth
By
RPN"
100/101
Data Entry
6/38
E-73
Advertisement
Table of Contents
