Using The Song Sequencer - Casio CELVIANO AP-6OR User Manual

Additional Channel Mode Parameters
The following describes each of the additional channel mode param:
eters.
Program Change Number
This parameter controls the tone assigned to the channel
Volume
Pan
Effect Sena
Fine Tune
Coarse Tune
Expression
E-42
i
i
;
j }
i
Using the Song Sequencer
Recording. bef Praying back
Recording
Recoeding
Gea a
ing | .
>
|
* With this piano, Track | can de used to record keyboard play and Auto
'Accompaniment. Tracks 2 through 6 can be used for kayboard play orly,
$0 they are called melocy tracks. As shown in the Wustratian aDove, you
record Tracks 2 through 6 whie listening to what you have already 1e-
corded up to that point.
+ (Note that each track is independent of the others, This moans that evan
af you make @ mistake while recording, you only Need to re-record the
tack where the mislake was made.
+ Tong settings can be changed during recording, and each tane change
{s recorded in the applicable track. This means you can have up lo six
diferent insiument parts in one song.
Recording
'There are two methods you can use to record with the Song Sequenc:
en real-time recording and punch-in recording,
Real-time Recording
With this method, notes are recorded as you play them on the key-
board.
Punch-in Recording
This method lets you re-record from a specific section of a sang that
is already in memory. You can use punch-in recording to correct mis-
takes you made during real-time recording.
senac-cass | G04-c0470
Global Settings and Operations
A global setting or operation is one that affects all the tracks that make
up a song. The following is a list of the global settings and vpera-
ons.
* Metronome setting
+ Song delete
+ Meter setting
+ Initial tempo value
+ Quantize setting after recording
See "Global Settings and Operations" on page E-49 for ful! details on
what each setting and operation does, and how to use them.
Song Sequencer Data
The type of data that is stored by the Song Sequencer during a re:
cording operation depends on whether you are using real-time re-
cording or punch-in recerding. The same type of data is recorded
regardless of the track, excep! that only Track 1 records Auto Accom-
paniment
Real-time Recording — Track 1 Only
* Chords played on the accompaniment keyboard
Real-time Recording — All Tracks
* Notes played on the keyboard
© Initial tone setting and any changes made during recording
* Pedal operations
Punch-in Recording - Track 1 Only
cording.
+ Rhythm pattern changes during recording
* Chord specifications
+ Notes played on the keyboard
« Initial tone setting and any changes made during recurdiny,
» Pedal operations
Unrecorded Data
The following data is not recorded by the Song Sequencer.
* Touch Response on /off setting
+ One-touch: preset operations
+ Registration memory cperations
E-43